Canned Motor Pump RS25/7 - (180mm)

• After-sales Service: N/a
• Warranty: One Year
• Max.Head: 7
• Model NO.: RS25/7 -(180mm)
• Max.Capacity: 75
• Driving Type: Motor
• Impeller Number: Single-Stage Pump
• Working Pressure: Middle Pressure Pump
• Influent Type of Impeller: Single Suction Pump
• Position of Pump Shaft: Horizontal Pump
• Pump Casing Combined: Horizontal Split Pumps
• Mounting Height: Suction Centrifugal
• Impeller: Closed
• Usage: Pump, Pumps, Circulating Pump
• Trademark: osthohen
• Origin: China
• HS Code: 8413709990
• Production Capacity: 1500pics/Day

Product Description

RS25/7 (180)
Power source	1~220V/50Hz
Input power P1 (W)	132/92/62
Current I (A)	0.58/0.42/0.30
Motor type	78/70
Approved fluids	Clean water
Fluid temp (ºC)	-10~+110
Total head (m)	7
Max flow (l/min)	75
Rated folw(l/min)	50
Rated head(m)	4
Inlet size (mm)	25
Outlet size (mm)	25
inlet-outlet distance(cm)	180
Max pressure (bar)	10
Protection class	IP42
Weight (kg)	2.1
Cartridge	Stainless Steel
Impeller	Plastic
Shaft	Ceramic
Casing	Cast iron

the series pump is wet runner motor pump integrated the pump and motor, the impeller and the rotor is canned by cartridge and isolated from the stator. No mechanical seal used and only sealed by two gaskets. Bearings are lubricated by transferring liquid and motor is cooled by transferring liquid too. No leakage and low noise are two distinctive advantages for wet runner canned motor pump.


The circulation pumps are characterised by

1. Ceramic shaft and radical ceramic bearings
2. Carbon thrust bearing
3. Stainless steel rotor cartridge and bearing flange
4. Corrosion-resistant plastic impeller
5. Cataphoresis cast iron or engineering plastic pump housing

Motor insulation class H and integrated with thermal protector; Three speed selection motor; Terminal box position: 3h/6h/9h/12h easy for different installation ways. Easy-open terminal box with cable gland for easy electrical connection and keep sealing.